| ||||
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 55 | mm | |
| d1 | ≈ | 75.64 | mm |
| d3 | 80 | mm | |
| A | 47.5 | mm | |
| A1 | 15 | mm | |
| A3 | 12 | mm | |
| A5 | 39 | mm | |
| B1 | 62 | mm | |
| Da | 135 | mm | |
| J | 160 | mm | |
| J1 | 113.1 | mm | |
| L | 195 | mm | |
| N | 19 | mm | |
| s1 | 33.8 | mm | |
| T | 50.8 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 21 | mm | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 52.7 | kN | |
| Basic static load rating | C0 | 36 | kN | |
| Fatigue load limit | Pu | 1.53 | kN | |
| Limiting speed | 2700 | r/min |
| Mass unit | 5.1 | kg |
| Associated spanner | HN 12-13 | |||
| Recommended lock nut tightening angle | α | 95 | ° | |
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | FC 212 | |||
| Bearing | UK 212 K/H | |||
| Adapter sleeve | H 2312 | |||
| End cover | ECY 212 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
