| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 40 | mm | |
| d1 | ≈ | 51.8 | mm |
| A | 35.5 | mm | |
| A1 | 9 | mm | |
| A3 | 10 | mm | |
| B | 49.2 | mm | |
| B1 | 49.2 | mm | |
| B4 | 8 | mm | |
| Da | 100 | mm | |
| Db | 100.1 | mm | |
| J | 120 | mm | |
| J1 | 84.9 | mm | |
| L | 145 | mm | |
| N | 14 | mm | |
| s1 | 30.2 | mm | |
| T | 41.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 17 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
with shaft tolerance h6
| Mass unit | 1.85 | kg |
| Thread grub screw | G2 | M8x1 | ||
| Hexagonal key size for grub screw | N | 4 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Housing | FYC 508 | |||
| Bearing | YAR 208-2F | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
