| ||||
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 50 | mm | |
| d1 | ≈ | 69.06 | mm |
| d3 | 75 | mm | |
| A | 43 | mm | |
| A1 | 15 | mm | |
| A3 | 12 | mm | |
| A5 | 37.5 | mm | |
| B1 | 59 | mm | |
| Da | 125 | mm | |
| J | 150 | mm | |
| J1 | 106.1 | mm | |
| L | 185 | mm | |
| N | 19 | mm | |
| s1 | 32.5 | mm | |
| T | 45.5 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 17 | mm | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.25 | kN | |
| Limiting speed | 3000 | r/min |
| Mass unit | 4.3 | kg |
| Associated spanner | HN 10-11 | |||
| Recommended lock nut tightening angle | α | 90 | ° | |
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | FC 211 | |||
| Bearing | UK 211 K/H | |||
| Adapter sleeve | H 2311 | |||
| End cover | ECY 211 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
