| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 60 | mm | |
| d1 | ≈ | 75.64 | mm |
| A | 62 | mm | |
| A1 | 37 | mm | |
| B | 65.1 | mm | |
| B4 | 10 | mm | |
| H | 141.5 | mm | |
| H1 | 69.8 | mm | |
| H2 | 22 | mm | |
| J | 184 | mm | |
| J | max. | 189 | mm |
| J | min. | 179 | mm |
| L | 239.5 | mm | |
| N | 25 | mm | |
| N1 | 20 | mm | |
| s1 | 39.7 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 4 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 52.7 | kN | |
| Basic static load rating | C0 | 36 | kN | |
| Fatigue load limit | Pu | 1.53 | kN | |
| Limiting speed | 2700 | r/min |
with shaft tolerance h6
| Mass bearing unit | 4.55 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | P 212 | |||
| Bearing | UC 212/H | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
