| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 20 | mm | |
| d1 | ≈ | 33.74 | mm |
| d3 | 38 | mm | |
| A | 38 | mm | |
| A1 | 23 | mm | |
| B1 | 35 | mm | |
| H | 70.5 | mm | |
| H1 | 36.5 | mm | |
| H2 | 16 | mm | |
| J | 105 | mm | |
| J | max. | 110 | mm |
| J | min. | 100 | mm |
| L | 139.5 | mm | |
| N | 18 | mm | |
| N1 | 13 | mm | |
| s1 | 20.5 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 1.5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.6 | mm | |
| SWN | 7.94 | mm | |
| GN | 1/4-28 UNF | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 5850 | r/min |
| Mass bearing unit | 0.83 | kg |
| Associated spanner | HN 5-6 | |||
| Recommended lock nut tightening angle | α | 90 | ° | |
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing | P 205 | |||
| Bearing | UK 205 K/H | |||
| Adapter sleeve | H 2305 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
