| Compliance with standard | ISO | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 35 | mm | |
| d1 | ≈ | 46.1 | mm |
| d2 | 51.1 | mm | |
| A | 45 | mm | |
| A1 | 27 | mm | |
| A5 | 24.5 | mm | |
| B1 | 51.1 | mm | |
| B4 | 6.75 | mm | |
| H | 93 | mm | |
| H1 | 47.6 | mm | |
| H2 | 19 | mm | |
| J | 126 | mm | |
| J | max. | 133 | mm |
| J | min. | 119 | mm |
| L | 160 | mm | |
| N | 21 | mm | |
| N1 | 14 | mm | |
| s1 | 32.3 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 146 | mm | |
| J7 | 15.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 5300 | r/min |
with shaft tolerance h6
| Mass bearing unit | 1.55 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Housing | SY 507 M | |||
| Bearing | YEL 207-2F | |||
| End cover | ECY 207 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
