| d | 120 | mm | |
| D | 210 | mm | |
| H | 40 | mm | |
| d1 | 184 | mm | |
| C | 12 | mm | |
| H1 | 26 | mm | |
| J | 135 | mm | |
| J1 | 195 | mm | |
| N | 7 | mm | |
| N1 | 11 | mm | |
| N2 | 7 | mm | |
| a | 6.2 | mm | |
| r1 | min. | 0.6 | mm |
| r2 | min. | 0.3 | mm |
| Basic dynamic load rating - radial direction | C | 64.4 | kN | |
| Basic static load rating - radial direction | C0 | 140 | kN | |
| Basic dynamic load rating - axial direction | C | 72 | kN | |
| Basic static load rating - axial direction | C0 | 450 | kN | |
| Attainable speed for grease lubrication | 230 | r/min | ||
| Attainable speed for oil-air lubrication | 460 | r/min | ||
| Axial preload | 2 | kN | ||
| Axial unloading force | 4.4 | kN | ||
| Frictional moment | CRL | 6 | N·m | |
| Axial stiffness | 8.5 | kN/µm | ||
| Radial stiffness | 4.5 | kN/µm | ||
| Moment stiffness | 23 | kN·m/mrad |
| Mass bearing | 4.8 | kg |
| Guideline rotary table diameter | 315 | mm |
| Retaining bolts | ||||
| Size | M6 | |||
| Number of bolts | 2 | |||
| Angle between bolts | 180 | ° | ||
| Removal threads | ||||
| Size | G | M8 | ||
| Number of threads | 3 | |||
| Angle between threads | 120 | ° | ||
| Required attachment bolts, shaft | ||||
| Bolt size | M6 | |||
| Pitch | α | 15 | ° | |
| Number of bolts | 22 | |||
| Number of bolts omitted at retaining bolts position | 2, 180° apart | |||
| Tightening torque (Bolt grade 10.9) | 14 | N·m | ||
| Required attachment bolts, housing | ||||
| Bolt size | M6 | |||
| Pitch | α | 15 | ° | |
| Number of bolts | 21 | |||
| Number of bolts omitted at removal thread position | 3, 120° apart | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
