| d | 70 | mm | |
| D | 100 | mm | |
| B | 16 | mm | |
| d1 | 79.2 | mm | |
| d2 | 79.2 | mm | |
| D1 | 90.8 | mm | |
| K | 0.5 | mm | |
| C1 | 4.46 | mm | |
| r1,2 | min. | 1 | mm |
| r3,4 | min. | 0.3 | mm |
| a | 19.4 | mm |
| da | min. | 74.6 | mm |
| db | min. | 74.6 | mm |
| Da | max. | 95.4 | mm |
| Db | max. | 98 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.3 | mm |
| dn | 81.7 | mm |
| Basic dynamic load rating | C | 34.5 | kN | |
| Basic static load rating | C0 | 34 | kN | |
| Fatigue load limit | Pu | 1.43 | kN | |
| Attainable speed for grease lubrication | 13000 | r/min | ||
| Attainable speed for oil-air lubrication | 20000 | r/min | ||
| Contact angle | α | 15 | ° | |
| Ball diameter | Dw | 9.525 | mm | |
| Number of balls | z | 24 | ||
| Reference grease quantity | Gref | 4.5 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 130 | N | |
| Static axial stiffness, preload class A | 76 | N/µm | ||
| Preload class B | GB | 260 | N | |
| Static axial stiffness, preload class B | 104 | N/µm | ||
| Preload class C | GC | 520 | N | |
| Static axial stiffness, preload class C | 147 | N/µm | ||
| Preload class D | GD | 1040 | N | |
| Static axial stiffness, preload class D | 215 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.19 | ||
| Calculation factor | f1 | 1 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.04 | ||
| Calculation factor | f2C | 1.09 | ||
| Calculation factor | f2D | 1.15 | ||
| Calculation factor | fHC | 1 | ||
| Calculation factor | f0 | 16.2 | ||
| Mass bearing | 0.33 | kg |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
