| d | 75 | mm | |
| D | 115 | mm | |
| B | 20 | mm | |
| d1 | 89.28 | mm | |
| d2 | 86.8 | mm | |
| D1 | 100.72 | mm | |
| K | 0.5 | mm | |
| C1 | 6.73 | mm | |
| r1,2 | min. | 1.1 | mm |
| r3,4 | min. | 0.6 | mm |
| a | 32.3 | mm |
| da | min. | 81 | mm |
| db | min. | 81 | mm |
| Da | max. | 109 | mm |
| Db | max. | 110.8 | mm |
| ra | max. | 1 | mm |
| rb | max. | 0.6 | mm |
| dn | 91.5 | mm |
| Basic dynamic load rating | C | 24.7 | kN | |
| Basic static load rating | C0 | 20.4 | kN | |
| Fatigue load limit | Pu | 0.865 | kN | |
| Attainable speed for grease lubrication | 17000 | r/min | ||
| Attainable speed for oil-air lubrication | 27000 | r/min | ||
| Contact angle | α | 25 | ° | |
| Ball diameter | Dw | 9.525 | mm | |
| Number of balls | z | 26 | ||
| Reference grease quantity | Gref | 8.6 | cm³ | |
| Preload and stiffness (back-to-back, face-to-face) | ||||
| Preload class A | GA | 220 | N | |
| Static axial stiffness, preload class A | 178 | N/µm | ||
| Preload class B | GB | 670 | N | |
| Static axial stiffness, preload class B | 269 | N/µm | ||
| Preload class C | GC | 1340 | N | |
| Static axial stiffness, preload class C | 353 | N/µm | ||
| Calculation factors | ||||
| Calculation factor | f | 1.1 | ||
| Calculation factor | f1 | 0.99 | ||
| Calculation factor | f2A | 1 | ||
| Calculation factor | f2B | 1.03 | ||
| Calculation factor | f2C | 1.06 | ||
| Calculation factor | fHC | 1.01 | ||
| Calculation factor | e | 0.68 | ||
| Calculation factor (single, tandem) | Y2 | 0.87 | ||
| Calculation factor (single, tandem) | Y0 | 0.38 | ||
| Calculation factor (single, tandem) | X2 | 0.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y1 | 0.92 | ||
| Calculation factor (back-to-back, face-to-face) | Y2 | 1.41 | ||
| Calculation factor (back-to-back, face-to-face) | Y0 | 0.76 | ||
| Calculation factor (back-to-back, face-to-face) | X2 | 0.67 | ||
| Mass bearing | 0.59 | kg |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
