| d | 40 | mm | |
| D | 80 | mm | |
| B1 | 24.2 | mm | |
| B | 18 | mm | |
| d1 | ≈ | 52.6 | mm |
| d2 | 48 | mm | |
| D1 | ≈ | 69.8 | mm |
| D2 | 75.06 | mm | |
| D3 | 76.81 | mm | |
| C | 3.28 | mm | |
| b | 1.9 | mm | |
| r0 | 0.6 | mm | |
| r1,2 | min. | 1.1 | mm |
| L | 571.1 | mm | |
| ± | 10 | mm |
| da | min. | 46.5 | mm |
| db | min. | 46.5 | mm |
| db | max. | 47.4 | mm |
| Da | max. | 73.5 | mm |
| ra | max. | 1 | mm |
Bore diameter of end cover ≥ D2 + 1 mm
| Cable connector type | AMP Superseal | |||
| Number of pulses per revolution | N | 80 | ||
| Period accuracy | ± | 5 | % | |
| Phase shift output signal | 90 | ° | ||
| Phase shift output signal tolerance | ± | 30 | ° | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 5600 | r/min | ||
| Calculation factor | kr | 0.025 | ||
| Calculation factor | f0 | 14 |
| Mass sensor unit | 0.46 | kg |
| Snap ring | SP 80 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
