| da | 63.5 | mm | |
| Da | 160 | mm | |
| Ca | 64.795 | mm | |
| A1 | 98.425 | mm | |
| A2 | 223.838 | mm | |
| ba | 35.719 | mm | |
| H | 192.088 | mm | |
| H1 | 101.6 | mm | |
| H2 | 41.275 | mm | |
| J | min. | 263.525 | mm |
| J | max. | 295.275 | mm |
| L | 349.25 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 60.325 | mm | |
| R2 | 27.94 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 42.862 | mm | |
| Housing | SAF 615 | |||
| Bearing | 1315 K | |||
| Adapter sleeve assembly | SNW 115x2.1/2 | |||
| Stabilizing ring | 2 x SR-1615 | |||
| Taconite seal | TER 38 | |||
| ||||
| End plug (suffix Y) | EPR 7 | |||
| Max. speed for Taconite seal | 1250 | r/min |
| P60° | 121 | kN | |
| P90° | 72.5 | kN | |
| P120° | 45.4 | kN | |
| P150° | 40.5 | kN | |
| P180° | 49.8 | kN | |
| Pa | 8.27 | kN |
| Mass pillow block | 21.5 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 286.33 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
