| da | 100.013 | mm | |
| Da | 240 | mm | |
| Ca | 89.789 | mm | |
| A1 | 133.35 | mm | |
| A2 | 206.375 | mm | |
| ba | 48.419 | mm | |
| H | 287.337 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| J | min. | 371.475 | mm |
| J | max. | 406.4 | mm |
| J1 | 82.55 | mm | |
| L | 466.725 | mm | |
| N1 | 25.4 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 36.513 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 63.5 | mm | |
| Housing | SAF 622 | |||
| Bearing | 1322 KM | |||
| Adapter sleeve assembly | SNW 22x3.15/16 | |||
| Stabilizing ring | 2 x SR-1622 | |||
| Labyrinth ring | 2 x LOR 109 | |||
| ||||
| End plug (suffix Y) | EPR 13 | |||
| Bearing limiting speed | 3600 | r/min |
| P60° | 189 | kN | |
| P90° | 113 | kN | |
| P120° | 73.8 | kN | |
| P150° | 68.1 | kN | |
| P180° | 84.5 | kN | |
| Pa | 16.7 | kN |
| Mass pillow block | 62.8 | kg |
| Cap bolt | 2 x 1-8 UNC | |||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.875 | in | |
| Initial grease fill | 765.45 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
