| da | 46.038 | mm | |
| Da | 100 | mm | |
| Ca | 30.785 | mm | |
| A1 | 69.85 | mm | |
| A2 | 171.45 | mm | |
| S | 4.763 | mm | |
| ba | 25.4 | mm | |
| H | 133.35 | mm | |
| H1 | 69.85 | mm | |
| H2 | 23.813 | mm | |
| J | min. | 187.325 | mm |
| J | max. | 209.55 | mm |
| L | 244.475 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 34.131 | mm | |
| R2 | 15.875 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 31.75 | mm | |
| Housing | SAF 511 | |||
| Bearing | 1211 EKTN9 | |||
| Adapter sleeve assembly | SNW 11x1.13/16 | |||
| Stabilizing ring | SR-11-9 | |||
| Taconite seal | TER 22 | |||
| ||||
| End plug (suffix Y) | EPR 5 | |||
| Max. speed for Taconite seal | 1575 | r/min |
| P60° | 44.9 | kN | |
| P90° | 27.1 | kN | |
| P120° | 17.3 | kN | |
| P150° | 15.6 | kN | |
| P180° | 19.1 | kN | |
| Pa | 3.47 | kN |
| Mass pillow block | 8.04 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 81.3 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 82.215 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
