| da | 38.1 | mm | |
| Da | 100 | mm | |
| Ca | 45.796 | mm | |
| A1 | 69.85 | mm | |
| A2 | 171.45 | mm | |
| ba | 25.4 | mm | |
| H | 134.938 | mm | |
| H1 | 69.85 | mm | |
| H2 | 25.4 | mm | |
| J | min. | 187.325 | mm |
| J | max. | 200.025 | mm |
| L | 244.475 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 38.1 | mm | |
| R2 | 17.462 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 33.337 | mm | |
| Housing | SAF 609 | |||
| Bearing | 1309 EKTN9 | |||
| Adapter sleeve assembly | SNW 9x1.1/2 | |||
| Stabilizing ring | 2 x SR-1609 | |||
| Taconite seal | TER 18 | |||
| ||||
| End plug (suffix Y) | EPR 3 | |||
| Max. speed for Taconite seal | 2175 | r/min |
| P60° | 35.1 | kN | |
| P90° | 20.9 | kN | |
| P120° | 13.3 | kN | |
| P150° | 12 | kN | |
| P180° | 14.7 | kN | |
| Pa | 3.4 | kN |
| Mass pillow block | 8.68 | kg |
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 149.1 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 82.215 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
