| da | 149.225 | mm | |
| Da | 359.999 | mm | |
| Ca | 129.794 | mm | |
| A1 | 203.2 | mm | |
| A2 | 352.425 | mm | |
| S | 4.763 | mm | |
| ba | 91.281 | mm | |
| H | 422.275 | mm | |
| H1 | 209.55 | mm | |
| H2 | 85.725 | mm | |
| J | min. | 571.5 | mm |
| J | max. | 635 | mm |
| J1 | 127 | mm | |
| L | 749.3 | mm | |
| N1 | 34.925 | mm | |
| Threaded holes | |||
| R1 | 122.237 | mm | |
| R2 | 42.862 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 69.85 | mm | |
| Housing | SAF 634 | |||
| Bearing | 22334 CCK/W33 | |||
| Adapter sleeve assembly | SNW 134x5.7/8 | |||
| Stabilizing ring | SR-40-34 | |||
| Taconite seal | TER 139 | |||
| ||||
| End plug (suffix Y) | EPR 18 | |||
| Max. speed for Taconite seal | 520 | r/min |
| P60° | 364 | kN | |
| P90° | 218 | kN | |
| P120° | 136 | kN | |
| P150° | 120 | kN | |
| P180° | 145 | kN | |
| Pa | 60.9 | kN |
| Mass pillow block | 213 | kg |
| Cap bolt | 4 x 7/8-9 UNC | |||
| Cap bolt recommended tightening torque | 271.2 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt | 2 x 1/2-13 UNC | |||
| Appropriate attachment bolt size | G | 1.25 | in | |
| Initial grease fill | 2154.6 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
