| da | 53.975 | mm | |
| Da | 140 | mm | |
| Ca | 57.785 | mm | |
| A1 | 88.9 | mm | |
| A2 | 209.55 | mm | |
| S | 4.763 | mm | |
| ba | 40.481 | mm | |
| H | 167.481 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 244.475 | mm |
| J | max. | 279.4 | mm |
| L | 330.2 | mm | |
| N1 | 22.225 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 35.719 | mm | |
| Housing | SAF 613 | |||
| Bearing | 22313 EK | |||
| Adapter sleeve assembly | SNW 113x2.1/8 | |||
| Stabilizing ring | SR-16-13 | |||
| Taconite seal | TER 31 | |||
| ||||
| End plug (suffix Y) | EPR 7 | |||
| Max. speed for Taconite seal | 1400 | r/min |
| P60° | 83.2 | kN | |
| P90° | 49.8 | kN | |
| P120° | 30.2 | kN | |
| P150° | 26.7 | kN | |
| P180° | 31.6 | kN | |
| Pa | 9.43 | kN |
| Mass pillow block | 19 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.75 | in | |
| Initial grease fill | 87.885 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
