| da | 76.2 | mm | |
| Da | 150 | mm | |
| Ca | 45.796 | mm | |
| A1 | 88.9 | mm | |
| A2 | 195.275 | mm | |
| S | 4.763 | mm | |
| ba | 35.719 | mm | |
| H | 187.325 | mm | |
| H1 | 95.25 | mm | |
| H2 | 38.1 | mm | |
| L | 330.2 | mm | |
| Threaded holes | |||
| R1 | 53.975 | mm | |
| R2 | 22.225 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 34.925 | mm | |
| Housing | SSAFS 517 | |||
| Bearing | 22217 EK | |||
| Adapter sleeve assembly | SNW 17x3 | |||
| Stabilizing ring | SR-17-14 | |||
| Taconite seal | TER 54 | |||
| ||||
| End plug (suffix Y) | EPR 9 | |||
| Max. speed for Taconite seal | 1050 | r/min |
| P60° | 78.7 | kN | |
| P90° | 47.2 | kN | |
| P120° | 28.9 | kN | |
| P150° | 26.7 | kN | |
| P180° | 32 | kN | |
| Pa | 9.25 | kN |
| Mass pillow block | 24.9 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Initial grease fill | 110.56 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
