| da | 201.613 | mm | |
| Da | 339.999 | mm | |
| Ca | 101.803 | mm | |
| A1 | 190.5 | mm | |
| A2 | 339.725 | mm | |
| ba | 80.169 | mm | |
| H | 400.05 | mm | |
| H1 | 200.025 | mm | |
| H2 | 79.375 | mm | |
| J | min. | 549.275 | mm |
| J | max. | 619.125 | mm |
| J1 | 114.3 | mm | |
| L | 711.2 | mm | |
| N1 | 34.925 | mm | |
| Threaded holes | |||
| R1 | 120.65 | mm | |
| R2 | 42.069 | mm | |
| RG | 1 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 57.15 | mm | |
| Housing | SAFS 044 KA | |||
| Bearing | 23044 CCK/W33 | |||
| Adapter sleeve assembly | SNW 3044x7.15/16 | |||
| Stabilizing ring | 2 x 36053-140 | |||
| Taconite seal | TER 167 | |||
| ||||
| End plug (suffix Y) | EPR 23 | |||
| Max. speed for Taconite seal | 385 | r/min |
| P60° | 416 | kN | |
| P90° | 249 | kN | |
| P120° | 151 | kN | |
| P150° | 136 | kN | |
| P180° | 160 | kN | |
| Pa | 59.6 | kN |
| Mass pillow block | 208 | kg |
| Cap bolt | 1 1/8-7 UNC | |||
| Cap bolt recommended tightening torque | 1735.4 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Eye bolt | 2 x 1/2-13 UNC | |||
| Appropriate attachment bolt size | G | 1.25 | in | |
| Initial grease fill | 1672.65 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
