| da | 28.575 | mm | |
| Da | 71.999 | mm | |
| Ca | 26.797 | mm | |
| A1 | 50.8 | mm | |
| A2 | 82.55 | mm | |
| S | 1.984 | mm | |
| ba | 24.606 | mm | |
| H | 98.822 | mm | |
| H1 | 50.8 | mm | |
| H2 | 20.637 | mm | |
| J | min. | 142.875 | mm |
| J | max. | 155.575 | mm |
| L | 190.5 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 23.813 | mm | |
| R2 | 12.7 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 22.225 | mm | |
| Housing | SAF 507 | |||
| Bearing | 22207 EK | |||
| Adapter sleeve assembly | SNW 7x1.1/8 | |||
| Stabilizing ring | 36053-6 | |||
| Labyrinth ring | 2 x LER 14 | |||
| ||||
| End plug (suffix Y) | EPR 2 | |||
| Bearing limiting speed | 12000 | r/min |
| P60° | 18.2 | kN | |
| P90° | 11.1 | kN | |
| P120° | 6.67 | kN | |
| P150° | 5.78 | kN | |
| P180° | 7.12 | kN | |
| Pa | 2.4 | kN |
| Mass pillow block | 4.15 | kg |
| Cap bolt | 2 x 3/8-16 UNC | |||
| Cap bolt recommended tightening torque | 40.7 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 19.845 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
