| da | 42.862 | mm | |
| Da | 90 | mm | |
| Ca | 29.794 | mm | |
| A1 | 60.325 | mm | |
| A2 | 165.1 | mm | |
| S | 4.763 | mm | |
| ba | 24.606 | mm | |
| H | 121.841 | mm | |
| H1 | 63.5 | mm | |
| H2 | 23.813 | mm | |
| J | min. | 165.1 | mm |
| J | max. | 177.8 | mm |
| L | 209.55 | mm | |
| N1 | 15.875 | mm | |
| Threaded holes | |||
| R1 | 30.163 | mm | |
| R2 | 14.287 | mm | |
| RG | 1/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing | SAF 510 | |||
| Bearing | 1210 EKTN9 | |||
| Adapter sleeve assembly | SNW 10x1.11/16 | |||
| Stabilizing ring | SR-10-8 | |||
| Taconite seal | TER 20 | |||
| ||||
| End plug (suffix Y) | EPR 4 | |||
| Max. speed for Taconite seal | 1800 | r/min |
| P60° | 28.9 | kN | |
| P90° | 17.3 | kN | |
| P120° | 11.1 | kN | |
| P150° | 10.1 | kN | |
| P180° | 12.5 | kN | |
| Pa | 2.98 | kN |
| Mass pillow block | 5.9 | kg |
| Cap bolt | 2 x 7/16-14 UNC | |||
| Cap bolt recommended tightening torque | 61 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.5 | in | |
| Initial grease fill | 65.205 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
