| da | 68.263 | mm | |
| Da | 140 | mm | |
| Ca | 42.799 | mm | |
| A1 | 88.9 | mm | |
| A2 | 215.9 | mm | |
| S | 4.763 | mm | |
| ba | 34.131 | mm | |
| H | 174.625 | mm | |
| H1 | 88.9 | mm | |
| H2 | 31.75 | mm | |
| J | min. | 244.475 | mm |
| J | max. | 279.4 | mm |
| J1 | 53.975 | mm | |
| L | 330.2 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 53.181 | mm | |
| R2 | 21.431 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 31.75 | mm | |
| Housing | FSAFS 516 | |||
| Bearing | 22216 EK | |||
| Adapter sleeve assembly | SNW 16x2.11/16 | |||
| Stabilizing ring | SR-16-13 | |||
| Taconite seal | TER 44 | |||
| ||||
| End plug (suffix Y) | EPR 8 | |||
| Max. speed for Taconite seal | 1150 | r/min |
| P60° | 138 | kN | |
| P90° | 82.7 | kN | |
| P120° | 49.8 | kN | |
| P150° | 44.5 | kN | |
| P180° | 52.5 | kN | |
| Pa | 7.83 | kN |
| Mass pillow block | 20.9 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 298.3 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 87.885 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
