| da | 82.55 | mm | |
| Da | 160 | mm | |
| Ca | 62.23 | mm | |
| A1 | 98.425 | mm | |
| A2 | 206.375 | mm | |
| S | 4.763 | mm | |
| ba | 47.625 | mm | |
| H | 192.484 | mm | |
| H1 | 101.6 | mm | |
| H2 | 47.625 | mm | |
| J | min. | 263.525 | mm |
| J | max. | 295.275 | mm |
| J1 | 53.975 | mm | |
| L | 349.25 | mm | |
| N1 | 19.05 | mm | |
| Threaded holes | |||
| R1 | 60.325 | mm | |
| R2 | 27.781 | mm | |
| RG | 3/8 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 38.1 | mm | |
| Housing | SAW 518 | |||
| Bearing | 23218 CCK/W33 | |||
| Adapter sleeve assembly | SNW 118x3.1/4 | |||
| Stabilizing ring | SR-18-15 | |||
| Taconite seal | TER 189 | |||
| ||||
| End plug (suffix Y) | EPR 11 | |||
| Max. speed for Taconite seal | 950 | r/min |
| P60° | 101 | kN | |
| P90° | 60.9 | kN | |
| P120° | 38.3 | kN | |
| P150° | 34.7 | kN | |
| P180° | 42.3 | kN | |
| Pa | 14.1 | kN |
| Mass pillow block | 23.1 | kg |
| Cap bolt | 2 x 5/8-11 UNC | |||
| Cap bolt recommended tightening torque | 203.4 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Appropriate attachment bolt size | G | 0.625 | in | |
| Initial grease fill | 141.75 | g | ||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
