da | 50.8 | mm | |
Da | 100 | mm | |
Ca | 30.785 | mm | |
A1 | 69.85 | mm | |
A2 | 171.45 | mm | |
S | 3.175 | mm | |
ba | 26.988 | mm | |
H | 133.35 | mm | |
H1 | 69.85 | mm | |
H2 | 23.813 | mm | |
J | min. | 187.325 | mm |
J | max. | 209.55 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 34.131 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.163 | mm |
Housing | SAF 511 | |||
Bearing | 22211 EK | |||
Adapter sleeve assembly | SNW 11x2 | |||
Stabilizing ring | SR-11-0 | |||
Taconite seal | TER 25 | |||
|
End plug (suffix Y) | EPR 5 |
Max. speed for Taconite seal | 1575 | r/min |
P60° | 44.9 | kN | |
P90° | 27.1 | kN | |
P120° | 17.3 | kN | |
P150° | 15.6 | kN | |
P180° | 19.1 | kN | |
Pa | 4.14 | kN |
Mass pillow block | 7.85 | kg |
Cap bolt | 2 x 1/2-13 UNC | |||
Cap bolt recommended tightening torque | 81.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 39.69 | g |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ