| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 25 | mm | |
| d1 | ≈ | 33.74 | mm |
| A | 34 | mm | |
| A1 | 12 | mm | |
| A2 | 25 | mm | |
| B | 34.1 | mm | |
| B1 | 34.1 | mm | |
| B4 | 5 | mm | |
| H | 91 | mm | |
| H1 | 76 | mm | |
| H2 | 53 | mm | |
| L | 100 | mm | |
| L1 | 64 | mm | |
| L2 | 10 | mm | |
| L3 | 52 | mm | |
| N | 19 | mm | |
| N1 | 16 | mm | |
| N2 | 33 | mm | |
| s1 | 19.8 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 2.5 | mm | |
| Rα | 30 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 14 | kN | |
| Basic static load rating | C0 | 7.8 | kN | |
| Fatigue load limit | Pu | 0.335 | kN | |
| Limiting speed | 7000 | r/min |
with shaft tolerance h6
| Mass bearing unit | 0.85 | kg |
| Grub (set) screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Housing | TUJ 505 | |||
| Bearing | YAR 205-2F | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
