| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 30 | mm | |
| d1 | ≈ | 39.7 | mm |
| A | 30 | mm | |
| A1 | 8 | mm | |
| A3 | 8 | mm | |
| A5 | 22.5 | mm | |
| B | 38.1 | mm | |
| B4 | 5 | mm | |
| Da | 80 | mm | |
| J | 100 | mm | |
| J1 | 70.7 | mm | |
| L | 125 | mm | |
| N | 12 | mm | |
| s1 | 22.2 | mm | |
| T | 32.2 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 12.5 | mm | |
| Grease fitting | |||
| DN | 6.6 | mm | |
| SWN | 7.94 | mm | |
| GN | 1/4-28 UNF | ||
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed | 5000 | r/min |
with shaft tolerance h6
| Mass unit | 1.3 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing | FC 206 | |||
| Bearing | UC 206/H | |||
| End cover | ECY 206 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
