| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 90 | mm | |
| d1 | ≈ | 111.5 | mm |
| A | 68.5 | mm | |
| A1 | 20 | mm | |
| A3 | 18 | mm | |
| A5 | 45.5 | mm | |
| B | 96 | mm | |
| B4 | 15 | mm | |
| Da | 190 | mm | |
| J | 220 | mm | |
| J1 | 155.6 | mm | |
| L | 265 | mm | |
| N | 23 | mm | |
| s1 | 56.3 | mm | |
| T | 78.3 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 29 | mm | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 95.6 | kN | |
| Basic static load rating | C0 | 72 | kN | |
| Fatigue load limit | Pu | 2.7 | kN | |
| Limiting speed | 1600 | r/min |
with shaft tolerance h6
| Mass unit | 12.8 | kg |
| Thread grub screw | G2 | M12x1.5 | ||
| Hexagonal key size for grub screw | N | 6.08 | mm | |
| Recommended tightening torque for grub screw | 28.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 20 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.75 | in | |
| Housing | FC 218 | |||
| Bearing | UC 218 | |||
| End cover | ECY 218 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
