| ||||
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 60 | mm | |
| d1 | ≈ | 82.5 | mm |
| d3 | 85 | mm | |
| Db1 | 155 | mm | |
| A | 47 | mm | |
| A1 | 20 | mm | |
| A5 | 39 | mm | |
| B1 | 65 | mm | |
| J | 210 | mm | |
| H | 258 | mm | |
| L | 155 | mm | |
| N | 23 | mm | |
| s1 | ≈ | 35.3 | mm |
| T | 65.3 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 34.5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 57.2 | kN | |
| Basic static load rating | C0 | 40 | kN | |
| Fatigue load limit | Pu | 1.7 | kN | |
| Limiting speed | 2350 | r/min |
| Mass bearing unit | 5 | kg |
| Associated spanner | HN 12-13 | |||
| Recommended lock nut tightening angle | α | 100 | ° | |
| Recommended diameter for attachment bolts, mm | G | 20 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.75 | in | |
| Housing | FL 213 | |||
| Bearing | UK 213 K/H | |||
| Adapter sleeve | H 2313 | |||
| End cover | ECY 213 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
