| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 65 | mm | |
| d1 | ≈ | 82.5 | mm |
| Db1 | 155 | mm | |
| A | 47 | mm | |
| A1 | 20 | mm | |
| A5 | 39 | mm | |
| B | 68.3 | mm | |
| B4 | 10 | mm | |
| J | 210 | mm | |
| H | 258 | mm | |
| L | 155 | mm | |
| N | 23 | mm | |
| s1 | 42.9 | mm | |
| T | 72.9 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 34.5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 57.2 | kN | |
| Basic static load rating | C0 | 40 | kN | |
| Fatigue load limit | Pu | 1.7 | kN | |
| Limiting speed | 2350 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 4.85 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 20 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.75 | in | |
| Housing | FL 213 | |||
| Bearing | UC 213/H | |||
| End cover | ECY 213 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
