| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 75 | mm | |
| d1 | ≈ | 92.05 | mm |
| A | 53.5 | mm | |
| A1 | 22 | mm | |
| A3 | 3.2 | mm | |
| B | 73.3 | mm | |
| B4 | 12 | mm | |
| Da | 179.4 | mm | |
| Db1 | 154 | mm | |
| Db2 | 166 | mm | |
| J | 159 | mm | |
| L | 200 | mm | |
| N | 19 | mm | |
| s1 | 46.3 | mm | |
| T | 80.3 | mm | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 35 | mm | |
| Dowel pins | |||
| J6 | 176 | mm | |
| J7 | 51.5 | mm | |
| N4 | 4 | mm | |
| Basic dynamic load rating | C | 66.3 | kN | |
| Basic static load rating | C0 | 49 | kN | |
| Fatigue load limit | Pu | 2.04 | kN | |
| Limiting speed | 2600 | r/min |
with shaft tolerance h6
| Mass bearing unit | 6.2 | kg |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | FYJ 515 | |||
| Bearing | YAR 215-2F | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
