| Compliance with standard | North American standard | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 55.563 | mm | |
| d1 | ≈ | 69.06 | mm |
| d2 | 77.6 | mm | |
| A | 50 | mm | |
| A1 | 17.5 | mm | |
| A5 | 37.5 | mm | |
| Db1 | 133.4 | mm | |
| J | 130.2 | mm | |
| L | 161.9 | mm | |
| N | 17.46 | mm | |
| s1 | 29.2 | mm | |
| T | 61.2 | mm | |
| Values for B1 and s1 before the grub screw is tightened (sleeve and inner ring bore at starting position). | |||
| Grease fitting | |||
| DN | 6.579 | mm | |
| SWN | 11.113 | mm | |
| GN | 1/8-27 NPT | ||
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 35.5 | mm | |
| Basic dynamic load rating | C | 43.6 | kN | |
| Basic static load rating | C0 | 29 | kN | |
| Fatigue load limit | Pu | 1.25 | kN | |
| Limiting speed | 3600 | r/min |
| Mass bearing unit | 4.15 | kg |
| Thread grub screw | G2 | M6 | ||
| Hexagonal key size for grub screw | N | 3.05 | mm | |
| Recommended tightening torque for grub screw | 7.4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | F4B 511-AH | |||
| Bearing | YSP 211-203 SB-2F | |||
| End cover | ECY 211 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
