| ||||
Compliance with standard | JIS | |||
Housing material | Cast iron | |||
Sealing solution | Standard seals with additional flingers |
d | 50 | mm | |
d1 | ≈ | 69.06 | mm |
d3 | 75 | mm | |
A | 43 | mm | |
A1 | 18 | mm | |
A5 | 37.5 | mm | |
B1 | 59 | mm | |
Db1 | 130 | mm | |
J | 130 | mm | |
L | 162 | mm | |
N | 19 | mm | |
s1 | ≈ | 32.5 | mm |
T | 57.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
Grease fitting | |||
DN | 6.589 | mm | |
SWN | 11.11 | mm | |
GN | 1/8-27 NPT | ||
Threaded hole | |||
RG | 1/8-27 NPT | ||
R1 | 29 | mm |
Basic dynamic load rating | C | 43.6 | kN | |
Basic static load rating | C0 | 29 | kN | |
Fatigue load limit | Pu | 1.25 | kN | |
Limiting speed | 3000 | r/min |
Mass bearing unit | 3.6 | kg |
Associated spanner | HN 10-11 | |||
Recommended lock nut tightening angle | α | 90 | ° | |
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Housing | F 211 | |||
Bearing | UK 211 K/H |
Adapter sleeve | H 2311 | |||
End cover | ECY 211 |
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ