| ||||
| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 25 | mm | |
| d1 | ≈ | 39.7 | mm |
| d3 | 45 | mm | |
| A | 30 | mm | |
| A1 | 14 | mm | |
| A5 | 22.5 | mm | |
| B1 | 38 | mm | |
| Db1 | 80 | mm | |
| J | 83 | mm | |
| L | 108 | mm | |
| N | 12 | mm | |
| s1 | ≈ | 22.5 | mm |
| T | 40.5 | mm | |
| Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). | |||
| Grease fitting | |||
| DN | 6.6 | mm | |
| SWN | 7.94 | mm | |
| GN | 1/4-28 UNF | ||
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 20.5 | mm | |
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Limiting speed | 5000 | r/min |
| Mass bearing unit | 1.15 | kg |
| Associated spanner | HN 5-6 | |||
| Recommended lock nut tightening angle | α | 95 | ° | |
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in | |
| Housing | F 206 | |||
| Bearing | UK 206 K/H | |||
| Adapter sleeve | H 2306 | |||
| End cover | ECY 206 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
