| Compliance with standard | Not standardized | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals | |||
| d | 40 | mm | |
| d1 | ≈ | 51.8 | mm |
| d2 | 56.5 | mm | |
| A | 48 | mm | |
| A1 | 30 | mm | |
| B1 | 43.2 | mm | |
| B4 | 6.75 | mm | |
| H | 99 | mm | |
| H1 | 49.2 | mm | |
| J | 88.9 | mm | |
| L | 116 | mm | |
| s1 | 32.7 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
with shaft tolerance h6
| Mass bearing unit | 1.65 | kg |
| Housing thread for attachment bolts | G | M12 | ||
| Thread length | G1 | 20 | mm | |
| Thread grub screw | G2 | M10x1 | ||
| Hexagonal key size for grub screw | N | 5 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Housing | SYF 508 | |||
| Bearing | YET 208 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
