| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 50 | mm | |
| d1 | ≈ | 62.1 | mm |
| A | 56 | mm | |
| A1 | 32 | mm | |
| B | 51.6 | mm | |
| B4 | 9.5 | mm | |
| H | 116 | mm | |
| H1 | 57.2 | mm | |
| H2 | 19 | mm | |
| J | 159 | mm | |
| J | max. | 161 | mm |
| J | min. | 157 | mm |
| L | 206.5 | mm | |
| N | 22 | mm | |
| N1 | 20 | mm | |
| s1 | 32.6 | mm | |
| Threaded hole | |||
| RG | 1/8-27 NPT | ||
| R1 | 3 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.589 | mm | |
| SWN | 11.11 | mm | |
| GN | 1/8-27 NPT | ||
| Basic dynamic load rating | C | 35.1 | kN | |
| Basic static load rating | C0 | 23.2 | kN | |
| Fatigue load limit | Pu | 0.98 | kN | |
| Limiting speed | 3300 | r/min |
with shaft tolerance h6
| Mass bearing unit | 2.65 | kg |
| Thread grub screw | G2 | M10x1.25 | ||
| Hexagonal key size for grub screw | N | 5.08 | mm | |
| Recommended tightening torque for grub screw | 16.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 16 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.625 | in | |
| Housing | P 210 | |||
| Bearing | UC 210 | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
