| Compliance with standard | JIS | |||
| Housing material | Cast iron | |||
| Sealing solution | Standard seals with additional flingers | |||
| d | 35 | mm | |
| d1 | ≈ | 46.1 | mm |
| A | 46 | mm | |
| A1 | 28 | mm | |
| B | 42.9 | mm | |
| B4 | 6 | mm | |
| H | 93.5 | mm | |
| H1 | 47.6 | mm | |
| H2 | 18.5 | mm | |
| J | 127 | mm | |
| J | max. | 131 | mm |
| J | min. | 123 | mm |
| L | 166.5 | mm | |
| N | 21 | mm | |
| N1 | 17 | mm | |
| s1 | 25.4 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 3.5 | mm | |
| Rα | 45 | ° | |
| Grease fitting | |||
| DN | 6.6 | mm | |
| SWN | 7.94 | mm | |
| GN | 1/4-28 UNF | ||
| Basic dynamic load rating | C | 25.5 | kN | |
| Basic static load rating | C0 | 15.3 | kN | |
| Fatigue load limit | Pu | 0.655 | kN | |
| Limiting speed | 4300 | r/min |
with shaft tolerance h6
| Mass bearing unit | 1.5 | kg |
| Thread grub screw | G2 | M6x0.75 | ||
| Hexagonal key size for grub screw | N | 3 | mm | |
| Recommended tightening torque for grub screw | 4 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 14 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5625 | in | |
| Housing | P 207 | |||
| Bearing | UC 207/H | |||
Chúng tôi đảm bảo cung cấp hàng chính hãng SKF đầy đủ CO, CQ
