Tra cứu nhanhTất cả

Tên hoặc mã sản phẩm
Tìm sản phẩm trong skf.com
Khoảng giá (VNĐ)
Từ: Đến:
Đăng ký | Quên mật khẩu
Máy gia nhiệt vòng bi
Máy gia nhiệt vòng bi
Đèn chớp kiểm tra vật quay
Đèn chớp kiểm tra vật quay
Vòng bi tang trống
Vòng bi tang trống
Thiết bị căn chỉnh đồng tâm
Thiết bị căn chỉnh đồng tâm
Súng bơm mỡ LAGH 400
Súng bơm mỡ LAGH 400
Súng bơm mỡ SKF 1077600
Súng bơm mỡ SKF 1077600

Thống kê truy cập

Số lượt truy cập: 1.618.760
Tổng số Thành viên: 41
Số người đang xem:  38

Bộ chia mỡ đa điểm - SSV Metering Devices

Đăng ngày: 09/04/2018 09:35
Bộ chia mỡ đa điểm - SSV Metering Devices
SSV Metering Devices
SSV Metering Devices SSV progressive metering de- vices are piston-type metering devices which reliably dispense the lubricant volume fed to the inlet in predetermined single quantities. By closing one outlet, the lubri- cant is fed to the next outlet below. This combining of outlets provides a large variety of me- tering possibilities. Additionally the internal porting avoids cum- bersome external T-fittings. A special feature of the progressive metering device is that a pre- vious feed line must supply lubri- cant before the next one can be supplied. This makes the pro- gressive system easy to visually or electrically monitor. It is avail- able with 6 to 22 outlets and can be used for greases up to NLGI 2 or oils of at least 40 mm /s. Lincoln progressive metering de- vices in block design have no defect-prone rubber seals. They can therefore be used with no problem at high differential pres- sure (up to 100 bar between two outlets) and for a wide range of temperatures. The maximum operating pressure is 350 bar.

SSV Metering Devices

SSV progressive metering de- vices are piston-type metering devices which reliably dispense the lubricant volume fed to the inlet in predetermined single quantities. By closing one outlet, the lubri- cant is fed to the next outlet below. This combining of outlets provides a large variety of me- tering possibilities. Additionally the internal porting avoids cum- bersome external T-fittings. A special feature of the progressive metering device is that a pre- vious feed line must supply lubri- cant before the next one can be

supplied. This makes the pro- gressive system easy to visually or electrically monitor. It is avail- able with 6 to 22 outlets and can be used for greases up to NLGI 2 or oils of at least 40 mm /s. Lincoln progressive metering de- vices in block design have no defect-prone rubber seals. They can therefore be used with no problem at high differential pres- sure (up to 100 bar between two outlets) and for a wide range of temperatures. The maximum operating pressure is 350 bar.
Advantages
• No rubber seals

• Single block design

• Internal combining of outlets

• Exact lubricant metering

• Easy to monitor

• Fault-free replacement: should a metering device be exchanged, connection and output or adjustment errors are avoided

• High operating pressure


http://www.lincolnindustrial.com/Catalogs/Uploaded/Catalog_102/Metering_devices.pdf

http://www.skf.com/binary/58-142088/W-113-EN.pdf

| Chia sẻ |
comments powered by Disqus

Tin cùng loại cũ hơn